The Ramén Ball Sector Control Valve in material configuration 1E is a stainless steel control valve with a deep Stellite metal seat and a hard chromed ball sector.
KS-1E is used for abrasive media at moderate pressure or pressure drop. This valve configuration is also used for elevated velocity, temperature and pressure drop which gives a risk for cavitation to occur. Certified according to fugitive emission standards ISO-15848-1 and VDI 2440 (TA-luft).

Typical applications
• Slurries
• Liqour (Green, white & black)
• Low pressure steam
• Chemicals
• Water & waste water
• Process water

The Ramén Ball Sector Control Valve in material configuration 1C is a stainless steel control valve with a Stellite metal seat and hard chrome coated ball sector and seat holding ring. KS-1C is used for abrasive media at moderate pressure or pressure drop. KS-1C is also well suited for applications with elevated velocity or pressure drop and with incipient cavitation. Certified according to fugitive emission standards ISO-15848-1 and VDI 2440 (TA-luft).

Typical applications
• Slurries
• Liqour (Green, white & black)
• Low pressure steam
• Chemicals
• Water & waste water
• Process water

The Ramén Ball Sector Control Valve in material configuration 1B is a stainless steel control valve with a Stellite metal seat and hard chromed ball sector. KS-1B is used when handling abrasive media at moderate pressure and temperature. This configuration is also used for elevated velocity or pressure drop. Certified according to fugitive emission standards ISO-15848-1 and VDI 2440 (TA-luft).

Typical applications
• Slurries
• Liqour (Green, white & black)
• Low pressure steam
• Chemicals
• Water & waste water
• Process water

The Ramén Ball Sector Control Valve in material configuration 1A is a stainless steel, soft seated control valve with a carbon/graphite reinforced PTFE seat ring and a hard chrome coated ball sector. KS-1A is recommended when media is slightly contaminated liquids, slurries or dry powder and where shut off tightness is required. Certified according to fugitive emission standards ISO-15848-1 and VDI 2440 (TA-luft).

Typical applications
• Fibre suspensions
• Condensate
• Waste water
• Chemicals
• Bio gas
• Tank bottom valve

The Ramén Ball Sector Valve in material configuration 1 is a stainless steel, soft seated control valve with a carbon/graphite reinforced PTFE seat with Viton® (FKM) o-ring seals and a media protected shaft bearing of modified PTFE, Rulon®. KS-1 is used in industrial applications for clean and non-abrasive liquid or gas at moderate pressure, pressure drop and temperature. This product is made by Ramén Valves in Sweden. Certified according to fugitive emission standards ISO-15848-1 and VDI 2440 (TA-luft).

Typical applications
•Clean and non-abrasive liquids
•Clean water, oil and non-abrasive suspensions
•Gases and vapors
•Nitrogen (N2), oxygen (O2), natural gas, air etc.